Simulasi sistem pompa suplai air bersih dengan kontrol berbasiskan PLC

Authors

  • Sudirman Jurusan Teknik Mesin Politeknik Negeri Bali, Jl. Kampus, Kuta Selatan, Badung Bali 80364, Indonesia
  • I Nyoman Gede Baliarta Jurusan Teknik Mesin Politeknik Negeri Bali, Jl. Kampus, Kuta Selatan, Badung Bali 80364, Indonesia
  • I Ketut Suherman Jurusan Teknik Mesin Politeknik Negeri Bali, Jl. Kampus, Kuta Selatan, Badung Bali 80364, Indonesia
  • Achmad Wibolo Jurusan Teknik Mesin Politeknik Negeri Bali, Jl. Kampus, Kuta Selatan, Badung Bali 80364, Indonesia

DOI:

https://doi.org/10.31940/jametech.v3i1.18-23

Keywords:

Smart relay, input, output, ladder diagram

Abstract

This paper discusses the simulation of control of a clean water pump system based on PLC. This simulation tool uses 3 tanks: tower tank, consumption tank and ground tank. The PLC used is the Zelio SR3PACKBD Smart Relay. The input is a stainless steel rod sensor placed in the tower tank and ground tank. The output is 2 pump motors and a solenoid valve. PLC program used Ladder diagram with ZELIO SOFT 2 programs. The test results show satisfactory results and the equipment required is very simple compared to conventional controls.

Downloads

Published

2022-03-31

How to Cite

Sudirman, Baliarta, I. N. G., Suherman, I. K., & Wibolo, A. (2022). Simulasi sistem pompa suplai air bersih dengan kontrol berbasiskan PLC. Journal of Applied Mechanical Engineering and Green Technology, 3(1), 18–23. https://doi.org/10.31940/jametech.v3i1.18-23

Issue

Vol. 3 No. 1 (2022): March 2022

Section

Articles

License

Copyright (c) 2022 Journal of Applied Mechanical Engineering and Green Technology